四肖期期准王中王四肖

Hello, welcome to Shenzhen Haide Precision Machinery Co., Ltd. official website!
Ranch

Hyde plane grinder

Aluminum alloy polishing liquid series

Aluminum alloy coarse grinding fluid

Back to list
  • product description
  • Specifications

铝合金粗抛液具有较强的切削力,适用于铝合金材质工件表面处理。 Aluminum alloy coarse grinding fluid: Aluminum alloy coarse grinding fluid has strong cutting force and is suitable for surface treatment of aluminum alloy workpieces. It can quickly remove the wear marks on the workpiece surface after the rough cutting process, and increase the smoothness of the workpiece surface after the operation. And has a slight gloss. This product is currently widely used for chamfering, burrs, burrs, oxide scale, wrinkles, mold marks, etc.

抛光粉、水、酸、无机盐、其他。 Rough grinding fluid components of aluminum alloy: polishing powder, water, acid, inorganic salt, others. Suitable for rough polishing of aluminum alloy workpieces. ) (For details, please contact Hyde 0755-89813868 )


(Figure 1: Partially added reagents)

(Figure 2: Polishing powder)

In general, to achieve the mirror effect of the workpiece, basically all go through three processes of rough polishing, fine polishing and polishing. If the workpiece itself has a certain accuracy, the rough polishing process can be omitted.

去除毛坯的大部分余量,最后所达到的效果要保持到大致的几何形状与粗糙度。 Rough polishing: Remove most of the margin of the blank, and the final effect should be maintained to the approximate geometry and roughness.

粗抛完成后的下一个工序就是精抛,结果是能够保持最精确的几何形状以及精细的裂纹深度。 Fine polishing: The next step after rough polishing is fine polishing. As a result, the most accurate geometry and fine crack depth can be maintained.

工件通过了粗抛、精抛工艺后,进入抛光工序;也是最终实现光学表面层实现的最后一个部分,前提下前两者必须要为最后一步抛光做好准备,使得在整个抛光过程当中,尽量去除粗抛与精抛所留下的破环层,实现光学表面最理想镜面效果。 Polishing: After the workpiece has passed the rough and fine polishing processes, it enters the polishing process; it is also the last part of the final realization of the optical surface layer. Under the premise, the first two must be prepared for the final polishing step, so that during the entire polishing process As far as possible, remove the broken ring layer left by the rough and fine polishing to achieve the most ideal mirror effect on the optical surface.

Because the three processes are different, the polishing liquid used is also different.

1. Consumables for rough polishing selection: rough polishing liquid, rough grinding disc (cast iron disc). Among the components of these two consumables, the material of the main component is slightly thicker, requiring higher hardness and greater granularity, so as to have better cutting force.

2. The consumables selected for fine polishing are: fine polishing liquid, fine grinding disc (tin plate). These two types of consumables are relatively more demanding and require finer materials and very small particles to produce raw materials.

3. The consumables for polishing selection are: polishing liquid, polishing disc (copper disc). This consumable has the highest requirements and has very strict standards for fineness. Liquids are generally configured using nano-sized granular raw materials. It is also usually forged with micron-sized metal particles.

   Choose Hyde to guarantee polishing effect

Generally speaking, the polishing liquid is configured according to the material of the customer's workpiece and the effect to be achieved. Before delivery, Hyde engineers will work according to the sample provided by the customer. In addition to the customer's polishing requirements, high yield, high efficiency, and low cost principles must be achieved. After delivery, provide detailed usage methods, and have engineers come to guide to ensure the polishing effect. ) (Please consult Hyde for details: 0755-89813868 )